DDX PH3 Mosquito Magnum Upgrade
Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Mosquito hotend to PHase 3.
Turn your Creality hotend into an all-metal.
Stop the issues created by the PTFE deformation when using temperatures above 220° C.
Improve the heat dissipation capacity and melt flow.
Use even shorter retractions.
EAN : 7350011411672
- Additional information
- Video Guides
- The 4 PHases of DDX
- What's in the Box
- Reviews (0)
Stock nozzles will not fit this hot block.
You need to upgrade the nozzles to the RepRap standard : M6x1x7.5×12.5
The hot block included in this product is compatible with the RepRap standard of nozzles. Below is a list of compatible versions.
Click each link to open the related product page.
This DDX set is the right configuration to upgrade the stock hotend to PHase 3, with an original Mosquito™ hotend on any Creality using the Bondtech DDX Direct Drive eXtruder.
High Quality Components
Product is supplied with a Bi-metallic structure reinforced Mosquito Magnum hotend, a PA6 Laser Sintered DDX Adapter for Mosquito, and a Brass Thermistor Adapter.
How To Change Nozzles
When changing nozzles with this hotend there is no need to immobilize the hot block before twisting the nozzle. You can screw in, or unscrew, the nozzles without holding the hot block steady, when using the recommended Torque Wrench.
|Freight Weight||42 g|
|Dimensions||8 × 5 × 3 cm|
What's in the Box
- 1x Mosquito™ Magnum Hotend
- 1x Bondtech DDX Adapter for Mosquito™
- 1x Bondtech Brass Thermistor Adapter
- 1x 1g bag of Thermal Paste
Only logged in customers who have purchased this product may leave a review.