Bondtech Presents Slice Engineering's Mosquito Magnum Hotend

Bondtech

/

Products

/

Hotends

/

Slice Engineering

/

Mosquito

/

Mosquito Magnum Hotend

Mosquito Magnum Hotend

— Now with new version —

Revised Features

  • New heat break with reinforced throat and revised radiator to prevent damage during installation and repairs
  • New heat sink with wider opening for the filament path to more readily accept multi-material setups like the Prusa MMU or Mosaic Palette.

Recommendation: Use on high flow applications.
(thick nozzles and thick layers)

Not compatible with DDX. Hotends for DDX are here.

Mosquito Magnum is only available for 1.75 mm filament at this time.

EAN : 085005423096

From: $170.00

PT1000 RTD 500°C Temperature Sensor

  • Accurate from freeze-your-butt-off cold (-50°C) to instantly-boil-your-innards hot (500°C)
  • Totally linear temperature response improves sensing accuracy across the range
  • Virtually eliminates lead measurement error inherent in Pt100 sensors
  • Highly accurate, IEC 60751 Class B tolerance (+/- 0.3 +0.005 |t| °C)
  • 15 mm long. 3 mm diameter sensor cartridge
  • 2 m long bare leads allow for easy adaptation to any 3D printer build
  • 300 series stainless steel cartridge to boost durability
  • Robust, thin-film construction sensor
  • Made in USA

This RTD Temperature Sensor is better suited for high amperage mainboards like:

  • Duet 3;
  • SKR PRO V1.x;
  • GTR V1.0
  • Other...

None of the above is a Bondtech product. Please do your due diligence and verify with the manufacturer.

Slice 300°C Thermistor

Now shipping with 2m long bare leads.

High Quality Component

  • Capable of reading from room temperature up to 300°C.
  • 15mm long, 3 mm diameter cartridge. A standard for sleeved thermistors.
  • 2m long bare leads.
  • 5mm long filler shaft.

EAN: 0850005423478

Mosquito® 24V 50W heater

Now shipping with 1.2m long leads.

  • Cartridge length: 22 mm;
  • Cartridge diameter: sized to fit into a 6mm H7 tolerance hole.
  • leads with 1.2m in length and Molex micro-fit crimps.

Mosquito® 12V 50W heater

  • Cartridge length: 22 mm;
  • Cartridge diameter: sized to fit into a 6mm H7 tolerance hole.
  • Extension cable is 1m in length
  • Molex connectors
  • 50W

Mosquito® 24V fan

  • High quality 25 mm box fan with Japanese bearings
  • 3.64 CFM
  • Genuine Molex Micro-Fit 3.0 connector
  • Mounts directly to Mosquito or Mosquito Magnum hotend with included hardware
  • Available in 12V or 24V configurations
  • 1 m extension cable included.

Mosquito® 12V fan

  • High quality 25 mm box fan with Japanese bearings
  • 3.64 CFM
  • Genuine Molex Micro-Fit 3.0 connector
  • Mounts directly to Mosquito or Mosquito Magnum hotend with included hardware
  • Available in 12V or 24V configurations
  • 1 m extension cable included.

Slice Engineering Thermal Paste

  • Boron Nitride thermal paste for improving conduction
  • Acts as a release agent
  • Unlike anti-seize compounds, Boron Nitride is not electrically conductive, which eliminates the risk of shorting out your heater cartridge or thermistor
  • Use the included applicator to coat the cartridge heater hole in your 3d printer heat block. Insert the cartridge heater while the paste is still wet, then let dry. The boron nitride boosts dissipation of heat from the hot section of the cartridge heater, improving its life.
  • Retails in 5 cc syringes with luer lock fittings.
  • Stable to 850 °C in air, 1800 °C in a vacuum.