Mosquito Magnum+ Air-cooled Hotend for 1.75mm filament

• High-quality 25 mm box fan with Japanese bearings
• 3.64 CFM
• Genuine Molex Micro-Fit 3.0 connector
• Mounts directly to Mosquito or Mosquito Magnum hotend with included hardware
• Available in 12V or 24V configurations
• 1 m extension cable included.
• 2x M2.5x16 BHCS screws

• High-quality 25 mm box fan with Japanese bearings
• 3.64 CFM
• Genuine Molex Micro-Fit 3.0 connector
• Mounts directly to Mosquito or Mosquito Magnum hotend with included hardware
• Available in 12V or 24V configurations
• 1 m extension cable included.

Now shipping with 2.0m long leads.

• Cartridge length: 22 mm;
• Cartridge diameter: sized to fit into a 6mm H7 tolerance hole.
• leads with 2.0 meter in length and Ferrule ends.

• Cartridge length: 22 mm;
• Cartridge diameter: sized to fit into a 6mm H7 tolerance hole;
• heater is 12cm in length and has Molex Micro-Fit male connector;
• Extension cable is 1.2 meter in length;
• Molex Micro-Fit female connector on one end;
• Ferrules connector on the other end.

• Accurate from freeze-your-butt-off cold (-50°C) to instantly-boil-your-innards hot (500°C)
• Totally linear temperature response improves sensing accuracy across the range
• Virtually eliminates lead measurement error inherent in Pt100 sensors
• Highly accurate, IEC 60751 Class B tolerance (+/- 0.3 +0.005 |t| °C)
• 15 mm long. 3 mm diameter sensor cartridge
• 2 m long bare leads allow for easy adaptation to any 3D printer build
• 300 series stainless steel cartridge to boost durability
• Robust, thin-film construction sensor
• Made in USA

This RTD Temperature Sensor is better suited for high amperage mainboards like:

• Duet 3;
• SKR PRO V1.x;
• GTR V1.0
• Other...

None of the above is a Bondtech product. Please do your due diligence and verify with the manufacturer.

Now shipping with 2m long bare leads.

High Quality Component

• Capable of reading from room temperature up to 300°C.
• 15mm long, 3 mm diameter cartridge. A standard for sleeved thermistors.
• 2m long bare leads.
• 5mm long filler shaft.