New Creality Ender Upgrade Kit from Slice Engineering







Creality Ender Upgrade Kit

Creality Ender Upgrade Kit

The Creality Ender Upgrade Kit is the perfect solution for common problems faced by Ender users and is the next step in your 3D printing journey. Simply install this hotend upgrade kit and get back to printing your dreams into reality.

Compatible with the following 3D printers:

  • Ender 2
  • Ender 3
  • Ender 3 Max
  • Ender 3 V2
  • Ender 3 Pro
  • Ender 5
  • Ender 5 Pro
  • Ender 5 Plus
  • Ender 6
  • CR-10 V1
  • CR-10S
  • CR-10-S4
  • CR-10-S5
  • CR-10 Mini
  • CR-20
  • CR-20 Pro
  • Tevo Tornado
  • Tronxy X5S


From: $106.95

Mosquito® 12V 50W heater

  • Cartridge length: 22 mm;
  • Cartridge diameter: sized to fit into a 6mm H7 tolerance hole;
  • heater is 12cm in length and has Molex Micro-Fit male connector;
  • Extension cable is 1.2 meter in length;
  • Molex Micro-Fit female connector on one end;
  • Ferrules connector on the other end.
#gap-377670214 { padding-top: 30px; }

$19.99 each

Only 13 left in stock (can be backordered)

Mosquito® 24V 50W heater

Now shipping with 2.0m long leads.

  • Cartridge length: 22 mm;
  • Cartridge diameter: sized to fit into a 6mm H7 tolerance hole.
  • leads with 2.0 meter in length and Ferrule ends.
#gap-302483508 { padding-top: 30px; }

$19.99 each

In stock (can be backordered)

Slice 300°C Thermistor

Now shipping with 2m long bare leads.

High Quality Component

  • Capable of reading from room temperature up to 300°C.
  • 15mm long, 3 mm diameter cartridge. A standard for sleeved thermistors.
  • 2m long bare leads.
  • 5mm long filler shaft.
$24.99 each

In stock (can be backordered)

Only 9 left in stock (can be backordered)

Select Currency

Select Country

Bundle includes:

  • 1x Copperhead® Heat Break
    Upgrade to a low-cost heat break for high-temperature printing (up to 450°C), access to engineering-grade plastics, and prevention of heat creep.

  • 1x BridgeMaster® Nozzle
    Achieve peak bridging performance while printing with the optimized BridgeMaster® nozzle for thermal conduction.

  • 1x Copperhead® Hot Block
    Get a copper alloy hot block from Slice Engineering to help your Copperhead™ Hotend melt plastic at temperatures up to 450°C, with nickel plating for enhanced performance.

  • 1x Copperhead® Silicone Boot
    Prevent cooling air and plastic adhesion on your Copperhead® Hot Block with this silicone boot made by Slice Engineering. It’s designed to repel plastic for added protection.

  • 1x Boron Nitride Paste
    Maximize the heating potential of your 3D printer and improve heat conduction between components with this non-electrically conductive paste.

The Copperhead Hot Block and C-E Heat Break can improve the performance of your Creality Ender 3D printer. This upgrade kit makes plastic melting faster with its quick-heating copper hot block and reduces clogging with its bimetallic heat break. It’s easy to install and leads to less downtime, wasted filament, and tinkering, resulting in better print quality and increased productivity.

Freight Weight 73 g
Dimensions 15 × 10 × 4 cm

Mosquito® 12V 50W heater

Freight Weight 43 g
Dimensions 15 × 10 × 2 cm

Mosquito® 24V 50W heater

Freight Weight 33 g
Dimensions 15 × 10 × 1 cm

Slice 300°C Thermistor

Freight Weight 22 g
Dimensions 15 × 10 × 1 cm


Installation instructions for upgrading your Creality Ender 3 Printer with this bundle can be found

A stock or aftermarket Creality Ender 3 heat sink (with a set screw that accepts the stock Creality heat break) is required for this to work.



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.