Bondtech Hotend Fix for Raise3D Pro2
Your Raise3D Pro2 is failing on those big PLA prints you bought it for? We have the fix.
The Raise3D Pro2 can actually be a very good 3D printer if you use this.
Raise3D Pro2‘s common heat-creep, clogs and under-extrusion problems have a very simple fix. Upgrade the hotends with bimetallic Copperhead and CHT technology.
Price:
$139.90
In stock (can be backordered)
Select Currency
Select Country
Bondtech Hotend Fix for Raise3D Pro2 Advantages
- Affordable with a great value for cost;
- Heat creep is minimized by Copperhead’s thermal performance;
- Better layer bonding from the Bondtech CHT nozzles…
- … and higher flow with PLA and other non-abrasive materials;
- Compatible with RepRap nozzles;
- Easy and quick to install process…
- … that includes a gauging tool to achieve optimal hotend setup.
Why Was The Bondtech Hotend Fix for Raise3D Pro2 Created
Many users contact us to buy extruder upgrades for the Raise3D Pro2.
These frequently repeated reports were evaluated by our Engineering team.
We found out most issues reported come from the hotend, not from the extruder.
The Raise3D Pro2 has a serious heat creep problem.
Print jobs using low Glass Transition Temperature materials are the most affected.
The longer PLA or TPU prints go over 2 hours, the higher the probability of failing due to under-extrusion or even clogging. Prints fail, or the parts made are very fragile.
For this serious problem we designed a simple and effective solution.
- The solution's core is the Copperhead Heat Break, that enhances heat dissipation and separates hot and cold side of the heat break more effectively;
- A new heat block was designed and machined by Bondtech to provide compatibility with the stock heaters, thermistors and silicone socks while enabling the Copperhead heat breaks and wide standard RepRap nozzles;
- To wrap it up, a pair of Bondtech CHT nozzles increase the flow capacity and improve layer adhesion, or enable the possibility of running the nozzles at lower temperatures.
Using Engineering grade or composite/abrasive materials?
If so, the PRO 2 Upgrade Bundle is the best choice for you.
Click the image or the button below to open the product page.
Freight Weight | 60 g |
---|---|
Dimensions | 10 × 8 × 4 cm |
Product Video
SETUP GUIDE
Setting Up the Bondtech Hotend Fix for Raise3D Pro2
The guide below shows how to install the Bondtech Hotend Fix For Raise3D Pro2.
The whole process is divided into 3 stages. Click each tab below to reveal the steps on each stage. This guide assumes you know how to operate the Pro2. If you don't, please refer to Raise3D Pro2's Documentation.
When we illustrate how to execute a step on extruder 1, the same procedure needs to be mirrored on extruder 2.
Step 1. Unload Filament
Step 2. Remove Fan Shrouds
Step 3. Release The Heaters And Thermistors
Step 4. Remove The Hotends
Step 1. Prepare The Hotend Fix For Installation
Step 2. Cold Tighten The Nozzle
Step 3. Apply The Heat Sink To The Hotend Fix
Step 4. Insert Heater and Thermistor
Using Silicone Socks
Using the Hotend Fix with a silicone sock is more stable and leads to better performance. Still, you have the choice not to use them.
Case you do or you don't, perform a new PID tunning to improve the thermal reaction of the heaters and thermistors.
Case you want to use them, after inserting the first hotend is the time to apply the silicone sock to extruder 1. After placing extruder 2, it gets too tight to add the silicone socks later.
This guide will continue without the silicone socks on. The procedures are exactly the same with or without, but without's easier to show.
Step 1. Hot Tighten The Nozzles
Step 2. Z-offset Re-adjustment
Check Raise3D Pro2's Documentation for more detailed information on how to re-adjust the Z-offsets.
Step 3. PID Tunning
Either you will use the Silicone socks or not, before starting using the Pro2, perform a PID tunning on both hotends.
Check Raise3D Pro2's Documentation for more detailed information on how to perform, a PID tunning.
This Set Includes
- 2x Copperhead Bi-metallic Standard G2 Heat-break
- 2x Bondtech Coated Brass CHT 0.4 Nozzle
- 2x Raise3D Hotblock Pro by Bondtech
- 8x M3x3 set screw
- 1x Spacer for Raise3D Hotblock Pro
Nozzles for fixed Pro2
If you fix your Raise3D Pro2 with our Set, here are some additional options you should consider.
Printing with non-abrasive materials?
The Coated Brass nozzles with CHT technology from Bondtech enhance the performance of your heat blocks by at least 30%.
Open product page
Printing with abrasive materials?
These everlasting Vanadium nozzles from Slice Engineering will give you access to all Carbon or Glass filled materials you will ever need.
Open product page
Printing with materials above 300C?
These abrasive resistant and BridgeMaster copper nozzles from Slice Engineering will give you access to materials you need to process above 300°C, like PEI, PPSU, PEEK, Thermax PSU, hi temp Iglidur and many others..
Open product pageOnly logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.