PTFE Fittings Set for Prusa Mini
Price:
$14.90
In stock
Use this set to simplify how to install, use and maintain Prusa Mini’s bowden tube.
In stead of using 3 PTFE tube sections, use one only.
Includes push-fit collets for ease of use and effective hold of the tube.
Pipe fittings are machined in Brass by Bondtech
Always check below if we have Product Alerts you should be aware of before buying.
Product includes:
- 2x Bowden Fitting for Prusa Mini
- 2x Push-fit collet 4mm
- 2x Bowden clip 1.75
- 1x 360mm long chamfered PTFE Tube 2/4 mm
| Freight Weight | 19 g |
|---|---|
| Dimensions | 12 × 8 × 2 cm |
Setup Guide
Required for the setup:
- Bondtech PTFE fittings set for Prusa Mini
- 8mm Wrench / Spanner (included with the mini)
- Permanent marker (optional)
1: Heat up, Unload filament, cooldown.
2: Unscrew nut on extruder, unscrew nut on Hotend, remove long PTFE tube.
3: Remove stock pipe fitting in hotend and extruder.
4: Remove stock PTFE tube in hotend and extruder.
5: (optional) : Use removed PTFE tubes and a marker to make a validation marking for PTFE tube insert depth, to make sure it seats all the way down.
6: Install bowden fittings in the extruder and hotend.
7: Insert PTFE tube into the extruder, push all the way down, Insert Bowden clip.
8: Insert PTFE tube into the hotend side pipe fitting, push all the way down, Insert Bowden clip.
Stretch the PTFE tube up to raise the push-fit collet to make room for the bowden clip.
Stretch the PTFE tube up to raise the push-fit collet to make room for the bowden clip before pushing it in.
Stretch the PTFE tube up to raise the push-fit collet to make room for the bowden clip before pushing it in.
Done!
Only logged in customers who have purchased this product may leave a review.
Related products
Select Currency
Select Country
Reviews
There are no reviews yet.