Slice Engineering's Mosquito Magnum Plus Hotend for 1.75mm filament

Bondtech

/

Products

/

Hotends

/

Slice Engineering

/

Magnum Plus

/

Mosquito Magnum+ Air 1.75mm

Mosquito Magnum+ Air 1.75mm

The Mosquito Magnum+ Liquid is the High Flow Mosquito hotend for industrial and high flow applications.

Mosquito Magnum+ supports up to 2 heater cartridges and 2 temperature sensors.

EAN : 08500055423874

From: $289.99

Nozzle Insulator for Mosquito Magnum+

This Nozzle Insulator is only compatible with:

  • Mosquito Magnum+ Liquid Cooled 1.75mm
  • Mosquito Magnum+ Liquid Cooled 2.85mm
  • Mosquito Magnum+ Air Cooled 1.75mm
  • Mosquito Magnum+ Air Cooled 2.85mm

Mosquito® 24V fan

  • High quality 25 mm box fan with Japanese bearings
  • 3.64 CFM
  • Genuine Molex Micro-Fit 3.0 connector
  • Mounts directly to Mosquito or Mosquito Magnum hotend with included hardware
  • Available in 12V or 24V configurations
  • 1 m extension cable included.

Mosquito® 12V fan

  • High quality 25 mm box fan with Japanese bearings
  • 3.64 CFM
  • Genuine Molex Micro-Fit 3.0 connector
  • Mounts directly to Mosquito or Mosquito Magnum hotend with included hardware
  • Available in 12V or 24V configurations
  • 1 m extension cable included.

Mosquito® 24V 50W heater

Now shipping with 1.2m long leads.

  • Cartridge length: 22 mm;
  • Cartridge diameter: sized to fit into a 6mm H7 tolerance hole.
  • leads with 1.2m in length and Molex micro-fit crimps.

Mosquito® 12V 50W heater

  • Cartridge length: 22 mm;
  • Cartridge diameter: sized to fit into a 6mm H7 tolerance hole.
  • Extension cable is 1m in length
  • Molex connectors
  • 50W

PT1000 RTD 500°C Temperature Sensor

  • Accurate from freeze-your-butt-off cold (-50°C) to instantly-boil-your-innards hot (500°C)
  • Totally linear temperature response improves sensing accuracy across the range
  • Virtually eliminates lead measurement error inherent in Pt100 sensors
  • Highly accurate, IEC 60751 Class B tolerance (+/- 0.3 +0.005 |t| °C)
  • 15 mm long. 3 mm diameter sensor cartridge
  • 2 m long bare leads allow for easy adaptation to any 3D printer build
  • 300 series stainless steel cartridge to boost durability
  • Robust, thin-film construction sensor
  • Made in USA

This RTD Temperature Sensor is better suited for high amperage mainboards like:

  • Duet 3;
  • SKR PRO V1.x;
  • GTR V1.0
  • Other...

None of the above is a Bondtech product. Please do your due diligence and verify with the manufacturer.

Slice 300°C Thermistor

Now shipping with 2m long bare leads.

High Quality Component

  • Capable of reading from room temperature up to 300°C.
  • 15mm long, 3 mm diameter cartridge. A standard for sleeved thermistors.
  • 2m long bare leads.
  • 5mm long filler shaft.

EAN: 0850005423478