DDX PH3 Copperhead Upgrade
Upgrade your Creality hotend and DDX Direct Drive eXtruder with a full genuine Copperhead hotend to PHase 3.
Turn your Creality hotend into an all-metal.
Stop the issues created by the PTFE deformation when using temperatures above 220° C.
Improve the heat dissipation capacity and melt flow.
Use even shorter retractions.
EAN : 7350011411658
Stock nozzles will not fit this hot block.
You need to upgrade the nozzles to the RepRap standard : M6x1x7.5×12.5
The hot block included in this product is compatible with the RepRap standard of nozzles. Below is a list of compatible versions.
Click each link to open the related product page.
This DDX set is the right configuration to upgrade the stock hotend to PHase 3, with a full and original Copperhead™ hotend on any Creality using the Bondtech DDX Direct Drive eXtruder.
High Quality Components
Product is supplied with a Aluminum Screw Mount Heat Sink, a W2S (Tungsten Disulfide) plated Stainless Steel and Copper Standard Heat break, a Nickel plated Copper Hot Block, a PA6 Laser Sintered DDX Adapter for Copperhead™, and a Brass Thermistor Adapter.
Heat Sink, Heat Break and Hot Block by
How To Change Nozzles
When changing nozzles with this hotend immobilize the hot block before twisting the nozzle. Forcing the nozzle to screw in, or to unscrew, without holding the hot block steady, may cause severe damage to the heat break.
|Freight Weight||42 g|
|Dimensions||8 × 5 × 3 cm|
What's in the Box
- 1x Copperhead™ Standard Heat Break
- 1x Copperhead™ Hot Block
- 1x Copperhead™ Screw Mount Heat Sink
- 2x M2.5×6 screw
- 1x Bondtech DDX Adapter for Copperhead™
- 1x Bondtech Brass Thermistor Adapter
- 1x 1g bag of Thermal Paste
Only logged in customers who have purchased this product may leave a review.