Bondtech LGX™ For Prusa i3 MK3S With Mosquito™ Hotends

Bondtech

/

Products

/

Upgrade Kits

/

LGX

/

LGX for Prusa

/

Bondtech® LGX® for MK3S & Mosquito®

Bondtech® LGX® for MK3S & Mosquito®

This is a LGX™ upgrade kit to use on
Prusa MK3S and MK3S+.
only with Mosquito or Mosquito Magnum hotends
from Slice Engineering.

A compatible X-carriage and Mosquito hotend are required.
If you don’t have them yet, check and add the optional items below.

EAN Code : 7350011414789

From: $178.00

LGX® Large Gears eXtruder

Each LGX™ extruder is supplied with:

  • 1x LGX™ feeder;
  • 1x Custom LDO Nema17 25mm pancake stepper motor
    (with PH-06AWJ connector);
  • 1x Bowden Interface Plug (with threaded metal push-fit);
  • 1x Direct Drive Interface Plug (for Slice Engineering hotends);
  • 1x 2mm Hex Key (recommended tool);
  • 1x Product Line Information Brochure;
  • 1x Powered By Bondtech sticker.

Now also shipping with additional accessories:

  • 3x M3x30 mm Low Head screws;
  • 4x M3x18 mm Stud with 5mm Hex with M3x4 thread;
  • 30mm PTFE tube to use in the Direct Drive Interface Plug.

This extruder only supports 1.75 mm size filament.

EAN Code : 7350011413607

$99.00

Available on backorder

LGX® Accessories for MK3S & Mosquito®

Accessories to build the LGX™ for Prusa MK3S and Mosquito upgrade kit.

High Temperature Set

EAN : 7350011414772

$79.00

LGX® X-carriage for MK3S & Mosquito® – optional

This X-Carriage kit is required to install our "Bondtech LGX™ for MK3S & Mosquito" upgrade kit.

Working Temperature up to 100°C

EAN Code : 7350011414758

Mosquito® hotend – optional

-- Now with new version --

Revised Features

  • New heat break with reinforced throat and revised radiator to prevent damage during installation and repairs
  • New heat sink with wider opening for the filament path to more readily accept multi-material setups like the Prusa MMU or Mosaic Palette.

Main Benefits

  • Superior heat break performance
  • Increased structural rigidity
  • Larger temperature operating range
  • Modular/adaptable to almost any FFF/FDM printer
  • Ideal for multi-extrusion systems
  • Lightweight

Oh yeah, and you can change the nozzle with one hand.

Mosquito is only available for 1.75 mm filament at this time.

Mosquito® Magnum Hotend – optional

Recommendation: Use on high flow applications.
(thick nozzles and thick layers)

 

Revised Features

  • New heat break with reinforced throat and revised radiator to prevent damage during installation and repairs
  • New heat sink with wider opening for the filament path to more readily accept multi-material setups like the Prusa MMU or Mosaic Palette.

Main Benefits

  • The Mosquito Magnum prints up to 20% faster than any other hotend on the market
  • A thermal insulator protects the extended melt zone from the effects of active cooling, and radiative heat loss. It has a heat transmission rate as low as 3 W/m*K, meaning you can have ultimate confidence in the speed of your print, while at the same time maintaining the high resolution benefits achieved with the standard Mosquito
  • The melt zone is extended proximally upwards to maintain a small form factor
  • A multi extrusion setup with both high flow and high resolution optimized designs can be created without needing to purchase new nozzles or make carriage modifications to accommodate hotends of different sizes

Oh yeah, and you can change the nozzle with one hand.

Mosquito Magnum is only available for 1.75 mm filament at this time.