Bondtech LGX™ For Flexibles For Prusa i3 MK3S With Copperhead™

Bondtech

/

Products

/

Upgrade Kits

/

LGX

/

LGX for Prusa

/

Bondtech® LGX® For Flexibles For Prusa MK3S

Bondtech® LGX® For Flexibles For Prusa MK3S


This is a LGX™ For Flexibles Special Setup to use on
Prusa MK3S and MK3S+.
It uses a Copperhead™ Hot Block and Copperhead™ LGX™ Heat Break from Slice Engineering.

Master All Materials * Excel With Flexibles


The LGX™ FF Print Head is a special unit that includes the LGX™ Large Gears eXtruder and the LGX™ FF short filament path hotend based on Copperhead, that will master all materials and excel with the soft and flexible.

EAN Code : 7350011413713

$257.00

LGX® Large Gears eXtruder

Each LGX™ extruder is supplied with:

  • 1x LGX™ feeder;
  • 1x Custom LDO Nema17 25mm pancake stepper motor
    (with PH-06AWJ connector);
  • 1x Bowden Interface Plug (with threaded metal push-fit);
  • 1x Direct Drive Interface Plug (for Slice Engineering hotends);
  • 1x 2mm Hex Key (recommended tool);
  • 1x Product Line Information Brochure;
  • 1x Powered By Bondtech sticker.

Now also shipping with additional accessories:

  • 3x M3x30 mm Low Head screws;
  • 4x M3x18 mm Stud with 5mm Hex with M3x4 thread;
  • 30mm PTFE tube to use in the Direct Drive Interface Plug.

This extruder only supports 1.75 mm size filament.

EAN Code : 7350011413607

Available on backorder

LGX® Shortcut Copperhead™ Hotend

Designed With Flexibles In Mind

The LGX™ Shortcut Copperhead™ is a special hotend to be used with the LGX™ eXtruder.

With the LGX™ it forms a print head that will excel at printing ALL most common materials and especially the soft and flexible.

This LGX™ add-on only supports 1.75 mm size filament.

EAN Code : 7350011413614

LGX® Accessories for FF Prusa MK3S

This LGX™ Accessories for FF Prusa MK3S is supplied with:

  • 1x LGX™ PA12 Mount;
  • 1x LGX™ PA12 X-carriage front
  • 1x LGX™ PA12 X-carriage back
  • 1x LGX™ PA12 Pinda Holder
  • 1x LGX™ PA12 Fan Shroud
  • 1x LGX™ PA12 Filament Sensor Box