Svenska
No products in the cart.
Bondtech LGX™ For Flexibles Set
Each LGX™ FF Set is supplied with:
- 1x LGX™ Black Anodized Aluminum Heat Sink
- 1x LGX™ Black Anodized Aluminum Air Cooled Cold Block
- 1x LGX™ Air-cooled Cold Block Mounting Hardware
- 1x Copperhead™ LGX™ Heat Break
- 1x Copperhead™ Hot Block
- 1x Bondtech M6x1x7.5 Coated Brass Nozzle 0.4mm
This LGX™ add-on only supports 1.75 mm size filament.
EAN Code : 7350011413614
€74.13
Available on backorder
- Description
- Additional information
- Technical Specification
- Video Guides
- Product Videos
- STEP FIles To Download
- Reviews (0)
Designed With Flexibles In Mind
The LGX™ For Flexibles Set is a special setup that contains the parts necessary to create, with the LGX™ eXtruder, a print head that will excel at printing most materials and especially the soft and flexible.
Designed To Be Flexible
The LGX™ For Flexibles Set includes a reversible heat sink that can be installed on the left or right hand side of the cold block. The heat sink also includes the hole pattern for attaching 40×40 fans.
Main Advantages
- Gives access to softer materials.
- Enables to print flexible and soft materials faster.
- Keeps the print-head small and light.
- Allows mounting in many different ways.
| Freight Weight | 96 g |
|---|---|
| Dimensions | 8 × 10.3 × 7.3 cm |
Technical Specification
LGX™ FF Set
- Cold Block Material : Anodized Aluminum;
- Heat Sink Material : Anodized Aluminum;
- Copperhead Hot Block materials : steel tube; copper body; nickel plating.
- Max operating temperature : 450°C
- LGX™ FF Set net weight : 55.5 g g
- Package measurements : 80x103x73 mm
- Package weight : 96 g
Video Guides
CREDITS
Soundtrack is based on 2 Bensound cinematic tunes:
Adventure;
Memories.
Check Bensound at https://www.bensound.com/
IMPORTANT NOTICE:
*************************************************************************************************
There is a miss on this video guide that will be corrected soon. To use the Direct Drive Interface Plugs with Slice Enginering hotends it is recommended to use a PTFE tube between the extruder and the heat break. Info on how to install it will be posted as a new video. This information does not have impact on using the LGX FF For Flexibles Set. Below is some useful additional information:
PFTE tube lengths:
Old Mosquito/Mosquito Magnum : 10 mm
New Mosquito/Mosquito Magnum : 11 mm
Copperhead screw mount : 30 mm
PTFE tube should be cut straight on both ends.
Slight chamfer inside is recommended, but not mandatory.
*************************************************************************************************
Product Videos
Coming soon.
STEP FIles To Download
Click the links below to download STEP files with simplified geometries of each available setup.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.